220mm Brake Rotor Upgrade Surron Light Bee

Upgraded 220mm Brake Rotors for Surron Light Bee, Eride Pro SS, Talaria XXX / MX3 / MX4

Specs:

• 220mm outer diameter 

• 2.3mm thickness

• Our custom flame design improves airflow and rids brake pad dust faster

• Made from 12CR13 stainless steel
  

Fits These Models:

• Surron Light Bee (all years)

• Eride Pro SS 1.0  / 2.0 / Pro S (DOES NOT FIT 3.0 or SR)

• Talaria XXX, MX3, MX4 (DOES NOT FIT MX5)

• Ventus One Bike

• 79Bike
  

Install Guide

1. Remove the wheel.

2. Warm each rotor bolt just enough to soften thread locker.

3. Remove bolts and lift the old rotor away.

4. Apply a light bead of blue thread locker to clean bolts.

5. Seat the new rotor and hand snug all bolts in a star pattern.

6. Torque each bolt to spec with a torque wrench.

7. Refit the wheel and spin to confirm clearance.

8. Install fresh pads and bed everything in with slow controlled stops.

FAQ

Q: Does this fit the Ultra Bee
A: No. This version is for the Surron Light Bee.

Q: Will it rub in an MTB style caliper
A: Most modern calipers accept 2.3 millimeter rotors. Center your caliper and verify clearance.

Q: Do I need new pads
A: Highly recommended. New pads plus a proper bed in gives the strongest bite and least noise.

Q: What direction should the flame face
A: Look for the text lasered onto the rotor, the text should be facing you when you mount the rotor

Ships from USA